I reviewed the wiring diagram in this thread and I don't know how to determine if power is coming in from L21 or L22, or both. Rhodes 72064 Panel Mount Time Switch Stock 56347-3 In Stock: 1 Price: 45. Rhodes 72064 - Price and Info Marktime / M.H. I tested the pink wire with the switch on/off and there is not voltage, which led me to believe the power comes from another source. Rhodes 72064 Panel Mount Time Switch - Price, Specs Artisan Test Electrical Test Electrical Parts Manufacturers Marktime / M.H. I disconnected the fuel line at the filter to shut down the engine. I reconnected it to the solenoid and started the engine, and when I turned the key off, it still would not shut down the engine. I removed the seat to access the solenoid, and discovered the pink wire was disconnected from the shutoff solenoid. Quick review of what I've done to troubleshoot. I'm trying to understand what powers the Pink wire that attaches to the Engine Shutdown Solenoid? The engine will not shut off when the key is turned off. Do you think if I do the upgrade it might resolve my fuel shut off problem? Since i moved white wire #L987 to relay position, has that some how affected that green wire? Also I noticed that the 10 gauge white wire at the start relay has no power i replaced relay still nothing? Traced that wire to starter and it is disconnected at starter? It looks like the prior owner has ran a new wire from key switch to starter sol.? Not sure if he did this to bypass the disable start relay which affected the start relay which also affected the timer? I see in the switch upgrade that there is two white wires at the key switch and that it is running to a different switch along with the purple wire from the relay side of the key switch. I am assuming that it is from key switch start position. Last night putting everything back together I checked the shut off timer and noticed that i do not have power to the green wire #306 which the schematic says is from st (key). I still have the issue with the fuel shut off. So as you see from my post to Mark 250 I think i solved my glow plug issue.
0 Comments
Leave a Reply. |